Ghost 2 Immobiliser Problems
The Ghost 2 immobiliser, designed to safeguard cars from hacking or key cloning, is a discreet device which can be installed without damaging your vehicle. It will not allow you to start your vehicle unless you press the correct sequence of buttons in your vehicle. It is similar to the mobile password.
Stop/Start
Ghost Immobilisers protect vehicles from being stolen by preventing the engine from starting unless it receives the correct PIN code. This is done without altering the vehicle, and is largely undetectable by thieves. The unit is directly connected to the ECU via the CAN databus in order to disable a vehicle. This system is very similar to the one automobile manufacturers have been using in their cars for years however, the criminal isn't able to add a key or use key relay technology to bypass it as they can with factory fitted systems.
Ghost is compatible with all vehicles with an engine, which includes cars, vans, motorhomes and caravans as well as bikes. The same system is also compatible with electric vehicles. It's an excellent alternative to wheel clamps and steering wheel locks.
When the Ghost is activated, it will block all buttons in your car, preventing the ignition from being started without the PIN code. You can enter the code by hand or using the Android or Apple app. If a wrong code is entered, the app will display an indicator light and the Ghost will not allow the vehicle to start again. This is a great deterrent and if the vehicle can't be started, the burglar will then move on to a different area of.
The Ghost is a weatherproof small device that can be hidden behind the most difficult-to-access areas of your vehicle. It is incredibly easy to install with an average of 20-30 minutes for each vehicle. It is also simple to take off if you decide to change vehicles, or give it to a service center or valet parking. It is an TASSA (Tracking and Aftermarket Security Systems Association), insurance approved system that is recognized by a few insurance companies. It also comes with a secure emergency Pin Code Override, and a Service/Valet mode which can be activated by pressing a button on the app, or by using your key fob.
Disarm
In contrast to the mechanical anti-theft devices, which are able to be removed, ghost immobilisers are hidden and integrated into the vehicle. Even if they were to be found and stolen, thieves would not be able start the car. They are almost impossible to hack or bypass. This is because a ghost immobiliser blocks key cloning, signal jamming and device spoofing - techniques that are used frequently by thieves to gain access to vehicles with standard immobilisers.
An immobiliser functions by sending an instruction to the ECU (electronic control unit). If the wrong code is received and the vehicle doesn't start since the engine won't start. It is possible to disable a ghost immobiliser using an application program, but it is very difficult and time consuming to do so. The software can only be installed and operated by a authorized installer.
The Ghost immobiliser is a small device that is tucked away in the wiring loom of your vehicle and is not visible to the naked eye once installed. It is not visible on diagnostic systems. There are no LED indicators, and it does not communicate with the engine through the OBD port. It communicates in a silent manner through the CAN data circuit.
The system will prevent the vehicle from starting unless it is able to receive a user-defined PIN code sequence. The PIN code is entered via buttons on the steering wheel, door panels or centre console. This is a more secure method to safeguard the car since it doesn't require a remote control or key fob.
Ghost also has a service mode that is activated through the mobile application. This allows you to give your keys to someone else to use for valet parking or service without having to enter an arm-disarm sequence.
Whether your Ghost is in service mode or not you should never attempt to remove the system yourself because it could affect the engine and cause damage. It is recommended that you contact a TASSA certified installer who will be able to remove the system safely and correctly. Our most recent GHOST immobilisers have a specific fingerprint QR sticker hidden in various parts of your vehicle. They are connected to our security register. If the device is removed and then is sold on the blackmarket, this will allow you to trace the owner of the system.
Anti-Hijack
The anti-hijack feature is an essential feature of the Ghost Immobiliser 2. This system works like smart keys and is one of the most secure ways to ensure your car is safe from thieves. If the ignition switch is switched to on and the vehicle is stationary for a period of 30 seconds and the Ghost system will automatically stall the engine and switch the warning lights on. This gives the driver or passenger time to press a security button (depending on the vehicle) before the system reactivates and the engine is once again allowed to start.
The Ghost system, unlike other competitors, has an electronic timer and controller which shuts down the valve that shuts off fuel after a predetermined period of time. This happens regardless of whether the ignition is on. The delay period should be long enough to allow the hijacked vehicle owner to drive away and be a sufficient distance from the stalled car before the system can be activated.
In addition to the standard CANbus immobiliser blocking capabilities of the Ghost, it has an extra level of security that prevents common methods of hacking used to gain access to modern vehicles like relay attacks keys range extending, relay attacks and ECU swapping. The Ghost system communicates in a quiet way and does not emit signals that can be snatched by thieves using code-grabbing technology or RF scanning.
The Ghost system comes with the valet or service mode that allows your car to temporarily be started and driven, without the requirement for a PIN code. This is great for parking your vehicle and have to leave it for a short period of time, such as for example to put groceries in the boot or open a garage door, etc. The system will end service mode depending on the speed and time or via the simple PIN code input process and give you security knowing that only YOU can utilize your vehicle!
Keyless Entry
Many consumers are now seeking out additional security measures due to the rising trend of contactless car theft. This is especially true for those who have put time or money to personalize their vehicle or own expensive vehicles. Immobilisers that are added to your vehicle can be a good method to stop this kind of theft as they can prevent your car from starting until the correct pin code is entered, along with your key fob.
Immobilisers are designed for different vehicle circuits, including ones that control starter motors and fuel pumps. They can also turn off the alarm for cars in order to attract attention and deter potential thieves.
These devices communicate with the engine control unit (ECU) via the CAN data circuit. They also they stop a burglar trying to get around it by putting in a new ECU or using an engine key programmer. The immobilisers can be installed in a discreet manner inside your vehicle, leaving no traces and are completely undetectable by the tools that high-tech thieves employ.
As opposed to other systems that require a specific application or tag that is worn on the person carrying it and a Ghost immobiliser is only disarmed by pressing a sequence of existing electronic buttons on your steering wheel, door panel, and central console, allowing you to choose a personal pin sequence. The pin can be easily changed and makes the device as secure as a bank card. It's also more difficult to crack since it requires as many as 20 presses.
Ghost also has a Valet/Service mode that allows you to disable the system when your vehicle will be handed over for valet parking or for service which allows it to operate within predetermined parameters, like a 30mph speed limit and you don't have to worry about your car being driven at a reckless speed. It can be activated using the original key or appropriate entry code.
Installed by our certified installers and certified installers, it is the most secure and efficient aftermarket CAN-immobiliser on the market. It is also certified by Thatcham for insurance purposes. The Ghost 2 immobiliser is also supplied with six QR fingerprint labels, an ISR contact card containing your unique QR code as well as an emergency number that is secure, all of which can be kept in the purse or wallet of your vehicle.